Die Bremse (The Brake)
Nos modes de paiement :
Réf. produit :
R27111-0106
EAN:
4262433410276
Informations sur le produit "Die Bremse (The Brake)"
Are you looking for a mountain bike brake with high braking power, good modulation and a look that stands out from the crowd?
(The Enduro Magazine seems to have found it).
Allow us to introduce: Die Bremse.
Developed by our partner 612 parts in Switzerland and manufactured by us at RadoxX to the highest quality standards.
You can officially end the search for your new brake here.
Product specification:
- Brake caliper: 4 stainless steel pistons with 17mm & 16mm diameter
- Brake master cylinder: 9mm master cylinder piston with Teflon seal
- Weight: 301g with 90cm hose
- Braking medium: Mineral oil
- Brake hose: Goodridge steel flex diameter 5.9mm; optional rear brake hose with 5.1mm diameter available for easier internal installation
- Pad shape: Hope V4 / Trickstuff Maxima
- Material: 7075-T6 Aluminium
- Place of manufacture: Made in Germany
- Compatible post mount adapter: Shimano (SM-MA-F203P/PM) / Magura (QM44) / Galfer (SB002, SB004)
Scope of delivery:
- 1x front brake system with 90cm hose length
- 1x rear brake system with 170cm hose length
- 2x shift adapter (Sram compatible)
- 2x bleedblock
-
2x brake pad screw
Details:
Due to the geometry of the brake calliper, these are not compatible with all PM adapters as standard (see compatible PM adapters).
Goodridge cables have an outer diameter of 5.9mm to 6mm. Problems may occur with internally routed cables in the frame - please check before ordering!
Brake pads are a matter of taste, which is why they are supplied without pads as standard. Our recommendation: Galfer Pro.
Eigenschaften "Die Bremse (The Brake)"
| Champ d'application: | Downhill, Enduro, Mountainbike, Trail |
|---|---|
| Colour: | Black, Clear |
| Material: | Aluminium 7075-T6, Stainless Steel |
Connexion
Du suchst den passenden Adapter?
Der Adapter (The Adapter)
35,00 €*
Brake Mount Caliper:
PM +23
|
Colour:
Black
Experience absolute precision and reliability with the CNC-machined Post Mount brake adapter by 612.
Developed in Switzerland and manufactured by us at RadoxX with the highest quality standards.
The sleek design and impeccable surface finish are the perfect complement for the brake.
Product Specifications:
:
Compatibility: Post Mount Forks + Frames
Weight: +20 = 19,8 g; +23 = 20 g; +40 = 16,5 g; +43 = 18,2 g
Material: 7075-T6 Aluminum
Place of Manufacture: Germany - Made in Germany
Scope of delivery:
1x Brake adapter4x Brake adapter mounting screws stainless steel M6X16 (4 g/pc.)
Info:
Make sure you choose the right size adapter. This depends on the PM standard on your fork or bike frame and the brake disc size used. Please also note the maximum approved brake disc diameter of your fork or frame.
Der Adapter (The Adapter)
35,00 €*
Brake Mount Caliper:
PM +23
|
Colour:
Silver
Experience absolute precision and reliability with the CNC-machined Post Mount brake adapter by 612.
Developed in Switzerland and manufactured by us at RadoxX with the highest quality standards.
The sleek design and impeccable surface finish are the perfect complement for the brake.
Product Specifications:
:
Compatibility: Post Mount Forks + Frames
Weight: +20 = 19,8 g; +23 = 20 g; +40 = 16,5 g; +43 = 18,2 g
Material: 7075-T6 Aluminum
Place of Manufacture: Germany - Made in Germany
Scope of delivery:
1x Brake adapter4x Brake adapter mounting screws stainless steel M6X16 (4 g/pc.)
Info:
Make sure you choose the right size adapter. This depends on the PM standard on your fork or bike frame and the brake disc size used. Please also note the maximum approved brake disc diameter of your fork or frame.
Der Adapter (The Adapter)
35,00 €*
Brake Mount Caliper:
PM +43
|
Colour:
Silver
Experience absolute precision and reliability with the CNC-machined Post Mount brake adapter by 612.
Developed in Switzerland and manufactured by us at RadoxX with the highest quality standards.
The sleek design and impeccable surface finish are the perfect complement for the brake.
Product Specifications:
:
Compatibility: Post Mount Forks + Frames
Weight: +20 = 19,8 g; +23 = 20 g; +40 = 16,5 g; +43 = 18,2 g
Material: 7075-T6 Aluminum
Place of Manufacture: Germany - Made in Germany
Scope of delivery:
1x Brake adapter4x Brake adapter mounting screws stainless steel M6X16 (4 g/pc.)
Info:
Make sure you choose the right size adapter. This depends on the PM standard on your fork or bike frame and the brake disc size used. Please also note the maximum approved brake disc diameter of your fork or frame.
Der Adapter (The Adapter)
35,00 €*
Brake Mount Caliper:
PM +20
|
Colour:
Black
Experience absolute precision and reliability with the CNC-machined Post Mount brake adapter by 612.
Developed in Switzerland and manufactured by us at RadoxX with the highest quality standards.
The sleek design and impeccable surface finish are the perfect complement for the brake.
Product Specifications:
:
Compatibility: Post Mount Forks + Frames
Weight: +20 = 19,8 g; +23 = 20 g; +40 = 16,5 g; +43 = 18,2 g
Material: 7075-T6 Aluminum
Place of Manufacture: Germany - Made in Germany
Scope of delivery:
1x Brake adapter4x Brake adapter mounting screws stainless steel M6X16 (4 g/pc.)
Info:
Make sure you choose the right size adapter. This depends on the PM standard on your fork or bike frame and the brake disc size used. Please also note the maximum approved brake disc diameter of your fork or frame.
Der Adapter (The Adapter)
35,00 €*
Brake Mount Caliper:
PM +40
|
Colour:
Black
Experience absolute precision and reliability with the CNC-machined Post Mount brake adapter by 612.
Developed in Switzerland and manufactured by us at RadoxX with the highest quality standards.
The sleek design and impeccable surface finish are the perfect complement for the brake.
Product Specifications:
:
Compatibility: Post Mount Forks + Frames
Weight: +20 = 19,8 g; +23 = 20 g; +40 = 16,5 g; +43 = 18,2 g
Material: 7075-T6 Aluminum
Place of Manufacture: Germany - Made in Germany
Scope of delivery:
1x Brake adapter4x Brake adapter mounting screws stainless steel M6X16 (4 g/pc.)
Info:
Make sure you choose the right size adapter. This depends on the PM standard on your fork or bike frame and the brake disc size used. Please also note the maximum approved brake disc diameter of your fork or frame.
Der Adapter (The Adapter)
35,00 €*
Brake Mount Caliper:
PM +20
|
Colour:
Silver
Experience absolute precision and reliability with the CNC-machined Post Mount brake adapter by 612.
Developed in Switzerland and manufactured by us at RadoxX with the highest quality standards.
The sleek design and impeccable surface finish are the perfect complement for the brake.
Product Specifications:
:
Compatibility: Post Mount Forks + Frames
Weight: +20 = 19,8 g; +23 = 20 g; +40 = 16,5 g; +43 = 18,2 g
Material: 7075-T6 Aluminum
Place of Manufacture: Germany - Made in Germany
Scope of delivery:
1x Brake adapter4x Brake adapter mounting screws stainless steel M6X16 (4 g/pc.)
Info:
Make sure you choose the right size adapter. This depends on the PM standard on your fork or bike frame and the brake disc size used. Please also note the maximum approved brake disc diameter of your fork or frame.
Der Adapter (The Adapter)
35,00 €*
Brake Mount Caliper:
PM +43
|
Colour:
Black
Experience absolute precision and reliability with the CNC-machined Post Mount brake adapter by 612.
Developed in Switzerland and manufactured by us at RadoxX with the highest quality standards.
The sleek design and impeccable surface finish are the perfect complement for the brake.
Product Specifications:
:
Compatibility: Post Mount Forks + Frames
Weight: +20 = 19,8 g; +23 = 20 g; +40 = 16,5 g; +43 = 18,2 g
Material: 7075-T6 Aluminum
Place of Manufacture: Germany - Made in Germany
Scope of delivery:
1x Brake adapter4x Brake adapter mounting screws stainless steel M6X16 (4 g/pc.)
Info:
Make sure you choose the right size adapter. This depends on the PM standard on your fork or bike frame and the brake disc size used. Please also note the maximum approved brake disc diameter of your fork or frame.
Der Adapter (The Adapter)
35,00 €*
Brake Mount Caliper:
PM +40
|
Colour:
Silver
Experience absolute precision and reliability with the CNC-machined Post Mount brake adapter by 612.
Developed in Switzerland and manufactured by us at RadoxX with the highest quality standards.
The sleek design and impeccable surface finish are the perfect complement for the brake.
Product Specifications:
:
Compatibility: Post Mount Forks + Frames
Weight: +20 = 19,8 g; +23 = 20 g; +40 = 16,5 g; +43 = 18,2 g
Material: 7075-T6 Aluminum
Place of Manufacture: Germany - Made in Germany
Scope of delivery:
1x Brake adapter4x Brake adapter mounting screws stainless steel M6X16 (4 g/pc.)
Info:
Make sure you choose the right size adapter. This depends on the PM standard on your fork or bike frame and the brake disc size used. Please also note the maximum approved brake disc diameter of your fork or frame.
Weitere Teile für dein Bike
A Light Head Cap 2.0
30,00 €*
Colour:
Black
Our Radoxx A Light Head Cap 2.0 headset cap has been trimmed for lightness and functionality.Despite its flyweight, it looks classy and turns your stem into a real piece of jewellery - or as Dangerholm calls it: "The cherry on the top".Product specifications:Weight: 3.7g (incl. screw)Outer diameter: 32mmCompatibility: 1 1/8" steerer tubeColours: Black, silverMaterial: 7075-T6 aluminiumPlace of manufacture: Made in GermanyScope of delivery:1x headset cap1x boltDetails:The Ahead cap may only be fitted using the bolt supplied. The specified tightening torque must be observed during assembly.
Before every ride, make sure that the bolts are tightened to the specified torque and that all components are free of play.
HxR Stem DH 31,8
99,00 €*
Colour:
Black
|
Handlebar diameter:
31,8 mm
|
Material:
Aluminium 7075-T6
|
Model year:
2023
|
Stem length:
45 mm
With our HxR - made by Radoxx downhill mountainbike stem, you get the performance you need for your next bike park trip or downhill race.Developed in France by our friends at HxR Components and manufactured in Germany by Radoxx Components - an unbeatable partnership that is reflected in this high-quality stem.Product specifications:Length & weight: 50mm (75g without bolts)Compatibility: Double bridge forks from all renowned manufacturers with direct mount interfaceHandlebar diameter: 31.8mmColours: Clear, BlackHandlebar clamp width: 64mmHandlebar height: 13.7mmMaterial: 7075-T6 aluminiumPlace of manufacture: GermanyScope of delivery:2x stem clamp4x boltDetails:The special clamp design ensures a more even clamping force on the handlebars. Pay attention to the specified torque during assembly. When using with carbon handlebars, we recommend the use of carbon assembly paste, unless otherwise specified by the handlebar manufacturer.Before every ride, make sure that the bolts are tightened to the specified torque and that all components are free of play.
Seat Clamp One
20,00 €*
Clamping diameter:
35 mm
|
Colour:
Black
Are you looking for a clean, high-quality, lightweight and reliable seat clamp?Then we present our Seat Clamp One! Material only in places where it is needed, a fine collar that enables uncomplicated positioning and manufactured in Germany using precise CNC milling technology.What else can you ask for?Product specifications:Weight: 10gClamp diameter: 35mmClamp height: 11.5mmColours: BlackMaterial: 6082-T6 AluminumPlace of manufacture: Germany - Made in GermanyScope of delivery:1x seat clamp incl. screwDetails:Before every ride, make sure that the bolts are tightened to the specified torque and that all components are free of play.
A Flat Head Cap
19,00 €*
Colour:
Black
The Radoxx A Flat Head Cap headset cap is the ideal combination of style and functionality for your bike.The clean CNC design fits perfectly with any stem and makes your cockpit conspicuously inconspicuous.Product specifications:Weight: 5,9 g (incl. screw)Outer diameter: 32mmCompatibility: 1 1/8" steerer tubeColours: Black, ClearMaterial: 7075-T6 aluminiumPlace of manufacture: Made in GermanyScope of delivery:1x headset cap1x 7075 Aluminium screw M6x35 with 4mm hexagon socketDetails:The Ahead cap may only be assembled using the bolt supplied. The specified tightening torque of 3 Nm max. must be observed during assembly.Before every ride, make sure that the bolts are tightened to the specified torque and that all components are free of play.